• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 306 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DDC118: CONV toggle timing acceptable range

DDC118: SPI Communication and Technical Document

Sunnykant Sharma
Prodigy 10 points
Part Number: DDC118
Other Parts Discussed in Thread: DDC112

Hi,

I am not getting any document or application notes in Technical Document section of DDC118 on TI website.

Also, I found that DDC118 support SPI communication, but I found only DIN ~ MOSI, DOUT ~MISO, DCLK ~ SCK.

I didn't found any chip select pin as the which is available in DDC112 with name ~DXMIT.

Could you please provide any link or document.

http://www.ti.com/product/DDC118/technicaldocuments

  • 0
    TI__Mastermind 49756 points

    Hi Sunny,

    Welcome to TI E2E forum!

    DDC118 supports serial interface and not SPI protocol. Thanks for pointing it out and we are working on fixing it.

    Please refer to the DDC118 datasheet for the serial timing specifications.

    You may also refer to the DDC118 user guide for the hardware interface to an FPGA.

    Both these documents are available at the technical documents section in the DDC118 product folder.