• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 2521 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ADS131E08: sample C code for ADS131E08

ADS131E08: sample code for ADS131E08

user1627097
Prodigy 10 points
Part Number: ADS131E08
Other Parts Discussed in Thread: ADS130E08, ADS130E08EVM-PDK

How can i download the source code of ads131E08EVM -- ads131E08evm-fwsource.zip.  
The original ftp://ftp.ti.com/pub/data_acquisition/Energy/source/ads131E08evm-fwsource.zip can not be accessed any longer .

Thanks

  • 0
    TI__Guru* 98995 points

    Hi,

    I reference the ADS131E08 example code in this post (but I'll repeat it here):

    http://e2e.ti.com/support/data-converters/f/73/t/769027

    The ADS131E08 example software is actually packaged up with the software for the ADS130E08EVM. The ADS130E08 is basically a 16-bit version of the ADS131E08. This firmware can be used as example code, and the ADS131E08 is functionally the same. I believe there's also specific code for the ADS131E08 as well.

    First go to the landing page for the ADS130E08EVM-PDK here:

    http://www.ti.com/tool/ADS130E08EVM-PDK

    Scroll down to the download for the software in the "Order Now" section.

    When you unpack the software, you can find code in the zipped firmware folder:

    I would note if you are already using a TI EVM, cancel the installation setup for the USBStyx driver. You only want to run this once, when you first start using our EVMs. Running this a second time removes the driver.

    Joseph Wu