DLP3000: Can't Connect to DLP LightCrafter via usb any more

kosmas kyriakopoulos

Prodigy 110 points

Part Number: DLP3000

I have the same issue and i have tried all the solutions given below but nothing..My dlp cannot connect

Can you help me?

over 7 years ago

0 Philippe Dollo over 7 years ago

TI__Mastermind 28005 points

Kosmas,

Are you referencing a particular thread for this issue? Please link to which one. Thanks.

Best Regards,
Philippe Dollo

0 kosmas kyriakopoulos over 7 years ago in reply to Philippe Dollo

Prodigy 110 points

e2e.ti.com/.../380515

0 Philippe Dollo over 7 years ago in reply to kosmas kyriakopoulos

TI__Mastermind 28005 points

Kosmas,

Your issue is likely related to the network adapter setup on your machine. I recommend reinstalling the RNDIS drivers and disabling all network adapters except for your communication with the LCR3000EVM.

I hope this helps.

Best Regards,
Philippe Dollo

DLP®︎ products

DLP products forum

DLP3000: Can't Connect to DLP LightCrafter via usb any more