Frequent Questions

  • [FAQ] AM62A7: How do I update the AM62A memory map?

    Part Number: AM62A7 Q: The default memory map for AM62A does not work for my application. How do I modify the RAM / DDR memory map to suit my module size and application?

  • [FAQ] TPS546E25: FAQ Which version of FUSION GUI supports TPS546E25 and where to get it?

    Part Number: TPS546E25 Which version of FUSION GUI supports TPS546E25 and where to get it? TI FUSION Digital Power Designer 7.10.5 and later supports TPS546E25 Version 7.10.17 is available here Link to GUI

  • [FAQ] AM6442: ROV throwing exception for NoLoad memory section

    Part Number: AM6442 I am Runtime Object View in my application and it throws expection when I keep Heap section into the NoLoad memory region. Note: The issue is specific to CCS Eclipse based IDE (CCS v12.8.1). Please refer below error message…

  • [FAQ] PGA900: How do I communicate with PGA900/PGA970 when the compensation algorithm is running using the COMBUF?

    Part Number: PGA900 I want to read data from the ADCs or the compensation algorithm, or any other register while the PGA900/970 is running. Most registers can only be read/written while the device is in reset, and they are inaccessible while the device…

  • [FAQ] AM62A7-Q1: Bring Your Own Model Deployment on AM62A in an end-to-end pipeline (GStreamer) with custom postprocessing

    Part Number: AM62A7-Q1 I have successfully compiled a neural network model with TIDL. Now I want to run it on the processor using GStreamer, but I want to implement my own custom postprocessing. How do I implement this?

  • [FAQ] AM62P-Q1: Continuous Data Streaming over UART using DMA

    Part Number: AM62P-Q1 Continuous Data Streaming over UART is a use-case across different applications. Lets check the implementation and any additional pointers to take care of while implementing this. This FAQ applies to other SoCs as well like AM62x…

  • [FAQ] AM2434: SDIO Setup for Wifi Chip

    Part Number: AM2434 How to Setup the SDIO configuration for MCU+SDK?

  • [FAQ] AM263P4: I2C OWN TArget Address

    Part Number: AM263P4 Other Parts Discussed in Thread: SYSCONFIG What is the meaning of I2C Own Target address in the syscfg file below. Is this related to the I2C controller or the I2C transmitter? What are the valid values it can take?

  • [FAQ] TDA4VH-Q1: How to print the tidl network version and the C7x firmware version from the application ?

    Part Number: TDA4VH-Q1 TIDL checks for the network version in the model to ensure compatibility with the tidl tools used to compile the model and the C7x firmware running in hardware. This will also be used to check the C7x firmware version that is…

  • [FAQ] TDA4VL-Q1: Details on ESM/ECC Callbacks in SDL

    Part Number: TDA4VL-Q1 What are the different callback functions in the ECC test framework in SDL? What is SDL_ECC_ESMCallBackFunction and when is it called? What is SDL_ESM_applicationCallbackFunction and when is it called? What is SDL_ECC_applicationCallbackFunction…

View FAQ threads