• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 545 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB934-Q1EVM: EVM schematic doesn't match DS pin configuration

Kazuki Itoh
Genius 11170 points

Part Number: DS90UB934-Q1EVM

Hi team,

I found DS90UB934-Q1EVM doesn't match DS pin configuration.

 It has MIPI interface and also it has TESTEN pin at pin-44. They are described as RES pins in the datasheet.

Could you please elaborate on these differences?

Regards,

Itoh

  • 0
    TI__Mastermind 18755 points

    Hello,

    The EVM shows a MIPI port so that if needed the 934 could be depopulated and replaced with a CSI deserializer.  As for the TESTEN pin, it at one point was for internal use and therefore part of the original EVM design.  I recommend following the functionality described in the datasheet.

    Regards,

    Nick