SN65DSI86: SN65DSI86

Gibson Lu

Part Number: SN65DSI86
Other Parts Discussed in Thread: SN65DSI84, SN65DSI83

We have platform which needs to support yocto v3.2.
Could you help check how to porting the IC(TI SN65DSI86) on yocto 3.2 kernel code?

We based on Mitac original project nd108t to develop yocto 3.2 code.

Please help share TI SN65DSI86 driver for yocto 3.2 kernel.

Thanks~

0 David (ASIC) Liu over 4 years ago

Hi,

We do not have a DSI86 driver for Yocto 3.2 kernel. Please see this link to the e2e FAQ on programming the DSI86, https://e2e.ti.com/support/interface-group/interface/f/interface-forum/945404/faq-sn65dsi86-how-do-i-programming-the-sn65dsi86-registers. You can use the spreadsheet in the FAQ to generate the DSI86 registers programming value base on the panel's EDID information and then port the value into the Yocto 3.2 kernel.

Thanks

David

0 Gibson Lu over 4 years ago

Hi David:
Could you please help confirm for SN65DSI83 and SN65DSI84 driver for Yocto 3.2 kernel?

0 Ikechukwu Anyiam over 4 years ago in reply to Gibson Lu

Hi Gibson,

We do not provide drivers or driver support for any of these devices.

Regards,

I.K.

0 Gibson Lu over 4 years ago in reply to Ikechukwu Anyiam

Got it, thanks a lot~

Interface forum