Hi team,
Could you please let me know if 933-934 operation is guaranteed if my customer uses +/-25% tolerance connector?
The below thread recommends <+/-20%, but I'd like to know if <20% is mandatory or +/-25% should be OK.
Regards,
Itoh
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Could you please let me know if 933-934 operation is guaranteed if my customer uses +/-25% tolerance connector?
The below thread recommends <+/-20%, but I'd like to know if <20% is mandatory or +/-25% should be OK.
Regards,
Itoh
Hello Itoh,
the maximum allowed impedance tollerence is +/-20%