THVD1550: Enable driver and receiver at the same time

Shotaro Sakai

Expert 3850 points

Part Number: THVD1550

Hello team,

Is it no problem to enable driver and receiver at the same time?

My customer considers to use this usage at the time of self-diagnosis.

Best regards,

Shotaro

over 5 years ago

0 Clemens Ladisch over 5 years ago

Guru 324240 points

In some applications, the receiver is kept always enabled to be able to detect if the signal is being corrupted by other devices on the bus. So yes, this is possible.

0 Eric Schott1 over 5 years ago in reply to Clemens Ladisch

TI__Guru 53535 points

Thanks for the help Clemens!

Hi Shotaro-san,

This is no problem. Let us know if you have any more questions.

Regards,
Eric Schott

Interface

Interface forum

THVD1550: Enable driver and receiver at the same time