• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 657 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65DSI86: Common mode choke

Roy Hsu
Genius 9360 points

Part Number: SN65DSI86

Hi Team,

Would you suggest to add common mode chokes at the eDP output of SN65DSI86? My understanding is that DP has relatively larger tolerance on intra-pair skew and therefore a common mode choke might not be required.

Thanks!

Roy

  • 0
    TI__Guru**** 186611 points

    Roy

    The common mode choke is to suppress the common mode noise with the added benefit of compensating for the inter-pair skew. So they need to see how much noise is on the eDP output and whether they need to use the choke to suppress it. 

    They can co-lay the choke with 0-ohm resistor and choose to populate/not populate depending on the system testing result.

    Thanks

    David