DS90UB954-Q1: Enabling and Disabling the CSI-2 Transmitter : delay between commands

Takuma Ito

Part Number: DS90UB954-Q1

when Enabling and Disabling the CSI-2 Transmitter as described in 7.4.28.1 Enabling and Disabling the CSI-2 Transmitter section, is delay between command needed? (like between FWD_CTL1 and CSI_CTL2)

over 4 years ago

0 Hamzeh Jaradat over 4 years ago

TI__Guru** 107710 points

Hello Ito,

No, there is no delay requirement. Please refer to the code example shown in the d/s: "7.4.28.4.1 Code Example for Basic Synchronized Forwarding"

Interface

Interface forum

DS90UB954-Q1: Enabling and Disabling the CSI-2 Transmitter : delay between commands