DS90UB953A-Q1: D0 D1 pin swap

Ryan Wang

Expert 7495 points

Part Number: DS90UB953A-Q1

Expert,

Is it possible to switch 953 CSI D0 and D1 in register setting to fix wrong routing in PCB?

Great thanks

over 4 years ago

0 Ryan Wang over 4 years ago

TI__Expert 7495 points

Expert,

Further explanation: Customer only use two CSI LANs: D0 and D1. Originally, D0 should send Byte 0,2,4... while D1 send Byte 1,3,5.... Can 953 switch them from register setting?

Thanks

0 Hamzeh Jaradat over 4 years ago in reply to Ryan Wang

TI__Guru** 108400 points

Hello Ryan,

unfortunately this is not supported.

0 Ryan Wang over 4 years ago in reply to Hamzeh Jaradat

TI__Expert 7495 points

Hamzeh,

great thanks

Interface

Interface forum

DS90UB953A-Q1: D0 D1 pin swap