XIO2001: How can i configuration xio2001 ?

jaein lee

Part Number: XIO2001

Hi all

I want to change the setting of xio2001 chip in Windows environment for pci to pcie bridge function.

Can you tell me step by step what i do?

I've already read the implementation guide.

But I can't understand how can i access pci registor

Thanks.

Best regards,

over 4 years ago

+1 Nasser Mohammadi over 4 years ago

TI__Guru* 93570 points

Hi Jaein,

XIO2001 is natively supported by win XP, win 7 and Linux - no special driver needed. In window environment, it is compatible with PCI V2.3 and please refer to this spec for configuration. Please note E2E case below for for further details:

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/930335/xio2001-access-to-pci-over-xio2001-with-linux/3437617#3437617

To change the setting, PCI/PCIe registers can be changed per PCI V2.3. Please refer to the data sheet for details.

Also, you can use Winrom utility to change the settings as well.

Regards ,, Nasser

Interface

Interface forum

XIO2001: How can i configuration xio2001 ?