TVP5147M1: NTSC(analog) signal convert to MIPI CSI or Parallel signal (digital)

Hello Jo,

Reviewing the datasheet for the device you have listed in the post, I don't believe that it is compatible for this application. I don't see any mention of outputting to those desired protocol.

Best Regards,

Ralph

Hi Ralph,

Thanks fort the confirmation. 

Then could you kindly advise us if TI have solution for converting NTSC(analog) signal to MIPI CSI or Parallel signal (digital)?

Thanks.

Regards,

Jo

Hi Jo,

I don't know if the older products in our portfolio do that, but I will see if anyone can comment on newer products that may be able to do this.

Best Regards,

Ralph

Hi Ralph, 

Thanks for the reply. I was not able to find converter for NTSC -> MIPI CSI or Parallel signal on TI.com. 

I look forward to the answer. 

It will be appreciate if you could let me know the update by 7/1(Thu.) your time. 

I'll have a call with customer on 7/2(Fri.).

Thanks.

Regards,

Jo

Jo

Unfortunately we do not have a part that can support NTSC to MIPI CSI conversion.

Thanks

David

Hi Ralph, David, 

I understood we dont have device can support NTSC to MIPI CSI conversion. 

What about converter to convert NTSC to other format?

I found following devices that can decode NTSC. I understand TVP device is NRND because of limited support. 

However, customer wants to know if we have any device can convert NTSC to another format if we dont consider NRND, so I would like to introduce these device to customer. 

Could you help confirm EOL plan for following devices? EOL info is primary concern for my customer. 

https://www.ti.com/assets/js/compareParts/compare.html?familyId=738&parts=TVP5158,TVP5151,TVP5154A,TVP5147M1,TVP5146M2,TVP5160,TVP5150AM1&cols=o1,p1241,p1389,p1326max,p0,p480,p1498,p1130&lang=en

Thanks.

Regards,

Jo