TPD1E0B04: USB2.0 DN/DP Line?

Antonio Faggio

Expert 8420 points

Part Number: TPD1E0B04
Other Parts Discussed in Thread: ESD122, TPD1E04U04, TPD1E01B04

Hi,

Please see below customer question:

I reviewed TI TVS diode to use USB2.0 DN/DP line.

Part Number : TPD1E0B04DPLR X2SON-2

Can it use USB2.0 DN/DP line?

Why I review the this part, I can’t find that have Low capacitance and small (0603 mm) size TVS.

Similar item TPD1E0B04DPLR datasheet in TI, you recommend DP/DN Line voltage value 0V to 5V.

If we use only DP/DN lines(Do not use control line), Can I use TPD1E0B04DPLR Item?

(As I know DP/DN Voltage level lower than 3.6V.)

Thanks,

Antonio

over 4 years ago

0 Matt Smith over 4 years ago

TI__Genius 14716 points

Hi Antonio,

You certainly can use TPD1E0B04 for USB 2.0 DP/DN lines. However, this might be a little overkill considering that this is currently our lowest capacitance part supporting speeds over 20 Gbps. For most USB 2.0 DP/DN lines, we usually recommend ESD122. It is a 2 channel 3.6 V device in an 3-pin X2SON package (0.6 mm x 1 mm) with 0.2 pF of capacitance. It also has double the IEC 61000-4-2 rating of TPD1E0B04.

However, if you are wanting to stick to single channel, you can use either TPD1E01B04 or TPD1E04U04. Both of these single channel devices come in a 2-pin X2SON package (0.6 mm x 0.3 mm) with very low capacitance and higher IEC 61000-4-2 ratings.

Let me know if any of these work for you.

Regards,

Matt Smith

0 Antonio Faggio over 4 years ago in reply to Matt Smith

TI__Expert 8420 points

Hi Matt,

Thank for your answer.

This project was developed already but because TVS item EOL, I look for alternative items.

Maybe I think TPD1E0B04 product would be appropriate for customer, right?

Thanks,

Antonio

0 Parker Dodson over 4 years ago in reply to Antonio Faggio

TI__Guru 54042 points

Hi Antonio,

We are on holiday today and will be returning 7/6/2021 - we will answer your inquiry within 24 - 48 hours.

Best,

Parker Dodson

0 Matt Smith over 4 years ago in reply to Antonio Faggio

TI__Genius 14716 points

Hi Antonio,

Like I said, TPD1E0B04 could work for this application, but it would not be the best fit. TPD1E01B04 or TPD1E04U04 would be better.

Regards,

Matt

Interface

Interface forum

TPD1E0B04: USB2.0 DN/DP Line?