• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 292 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB941AS-Q1: how to configure to drive 2 independent touch screen

fang yina
Prodigy 10 points
Part Number: DS90UB941AS-Q1

Hello team:

  Currently we have a product solution that use 1 941 to connect 2 948, to drive 2 screens and each one has touch.

According to https://www.ti.com/lit/an/snla308a/snla308a.pdf, it could set 2 interupts, but how to configure 941 register to access the each independent touch I2C to make the screen implement touch function? I can not get the clear information from that, could you please support this issue?

 

  • 0
    TI__Mastermind 25735 points

    Hello,

    For the 941 in splitter mode:

    • Set SER register 0xC6[5] = 1
    • Both REM_INTB and INTB will be used to display interrupts from each DES
    • REM_INTB_CTRL register is used to select the output of the remote interrupt
      • When REM_INTB_MODE = 0001 REM_INTB indicates remote interrupt from port 0, INTB indicates remote interrupt from port 1
      • REM_INTB_MODE can also be set to use GPIO pins instead of REM_INTB/INTB (See app-note)

    Setting two interrupts while in splitter mode is described further in this app-note.

    Regards,

    Ben Dattilo

  • 0 in reply to Ben Dattilo
    Prodigy 10 points

    Dear Ben:

       Thanks for your supporting, now we solved our issue according your feedback.