DS90UB954-Q1EVM: Embedded metadata Height

Varun Pandithurai

Part Number: DS90UB954-Q1EVM

Hi,

I am trying to get test pattern generation from DS90UB954 but I am getting a no reply from the camera I tried to find out the cause and I found that its due to wrong embedded metadata height from this Thread.

What should be the Embedded metadata height for the deserializer ?

over 3 years ago

0 Nicholas Darash over 3 years ago

TI__Mastermind 18755 points

Hello,

Can you provide some background on what you are looking for? Are you trying to use the 954 to create the test pattern?

Regards,

Nick

0 Varun Pandithurai over 3 years ago in reply to Nicholas Darash

Prodigy 45 points

Yes I am trying to create test pattern.

I am using a camera driver ov5693 in jetson xavier I just changed the i2c address and I am trying to stream. But I am getting error no reply from camera.

0 Nicholas Darash over 3 years ago in reply to Varun Pandithurai

TI__Mastermind 18755 points

Hello,

So in your setup you are trying to communicate from the jetson to the 954EVM? Is your problem the I2C communication or is it related to the image you are generating?

Regards,

Nick

Interface

Interface forum

DS90UB954-Q1EVM: Embedded metadata Height