• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 152 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB948-Q1: method to enable PG when no video signal input

Miranda Gu
Genius 16632 points
Part Number: DS90UB948-Q1

Hi team,

My customers wonder whether there's a method to enable PG when no video signal input? Appreciate your kind answer.

  • 0
    TI__Mastermind 25765 points

    Hi,

    Yes that can be done. PGCTL Register (Address = 0x64) configures the internal pattern generator. The pattern generator can also be configures in our Analog Launch Pad software when using our EVM. This document (SNLA132G) goes into further detail about using the internal pattern generator on our devices.

    Regards,

    Ben Dattilo