DS90UB948-Q1: method to enable PG when no video signal input

Miranda Gu

Genius 17252 points

Part Number: DS90UB948-Q1

Hi team,

My customers wonder whether there's a method to enable PG when no video signal input? Appreciate your kind answer.

over 4 years ago

0 Ben Dattilo over 4 years ago

TI__Mastermind 25765 points

Hi,

Yes that can be done. PGCTL Register (Address = 0x64) configures the internal pattern generator. The pattern generator can also be configures in our Analog Launch Pad software when using our EVM. This document (SNLA132G) goes into further detail about using the internal pattern generator on our devices.

Regards,

Ben Dattilo

Interface

Interface forum

DS90UB948-Q1: method to enable PG when no video signal input