• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 176 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB960-Q1: Timing requirement

Zirui Su
Expert 5340 points

Part Number: DS90UB960-Q1

Hi team

I would like to ask that if our system enters the low-power mode, power off the ub960, then re-power the ub960 when it wakes up, and then reconfigure the initialization register, is this feasible and will there be timing sequence issues?

  • 0
    TI__Mastermind 18755 points

    Hello,

    This should be fine to work but powering off the 960 will reset all registers so it will have to be completely reconfigured.  As for the power sequence, as long as you continue to follow the power-up sequence in the datasheet during each power cycle, you will be fine.

    Regards,

    Nick