Other Parts Discussed in Thread: DS250DF410, USB2ANY, SIGCONARCHITECT
Following the DS250DF410EVM User's Guide, connect the DS250DF410EVM Board to PC via USB plug cable and also with 3.3V power supply to EV Board.
slvc695(usb2any) & DS250DF410_Updater_v1p0p0p5(profile) are installed ok
When run the SigCon Architect , the GUI always show "There are no USB2ANY interfaces detected."
What else do I need to do to get the Sigcon GUI (EVM) working?
.
