Hello Team,
Thanks for your support.
Can you please let me know the Min/Max of height from seating plane?
Thanks,
Yuta Kurimoto
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Team,
Thanks for your support.
Can you please let me know the Min/Max of height from seating plane?
Thanks,
Yuta Kurimoto
Hello Yuta,
I'm not sure I have a spec on the minimum, but allow me a few days to look into this.
Regards,
Nick
Hello Nick,
Thanks, I'm looking forward your feedback. By when can you get the Min/Max spec?
Regards,
Yuta Kurimoto
Hi Yute,
Max is 0.05 but the min really can be as low as 0.
Regards,
Nick
Hello Nick,
Thanks for your answer.
I understand that the range of coplanarity is from 0mm to 0.05mm. This seems reasonable value.
Is the "0.08" mistake in the datasheet?
Regards,
Yuta Kurimoto
Hi Yuta,
The .08 is not referring to the seating plane. It may be showing the height of the flanks, let me double check.
Regards,
Nick
Hello Nick,
By when you can find the information?
I'm pushed from customer everyday so I'd like to get the answer immediately.
Regards,
Yuta Kurimoto
Hi Yuta,
Sorry, here is what I found out.
The 0.08 refers to surface profile (generic). When used for package, it means warpage.
Regards,
Nick