DP83822I: LED_0 & LED_1 allowable current value and absolute maximum rating

Jin Ikeda

Part Number: DP83822I

Hello Team,

Both terminals are directly connected to the LED, and currently it is designed to pass current to the LED by about 1 to 15 mA.

Could advise me about the allowable current value and absolute maximum rating of both LED_0 terminal and LED_1 terminal of DP83822I ?

Best Regards,

Jin

over 4 years ago

0 Joe Vanacore over 4 years ago

TI__Mastermind 18175 points

Hi Jin,

The PHY LED pins are characterized at 4mA.

Kind Regards,

Joe

All information in this correspondence and in any related correspondence is provided “as is” and “with all faults”, and is subject to TI’s Important Notice (www.ti.com/.../important-notice.shtml)

0 Jin Ikeda over 4 years ago in reply to Joe Vanacore

TI__Expert 6420 points

Hello Joe,

Thanks or your reply.

Does your answer mean that we don't spec allowable current value & abs max ?

Best Regards,

Jin

0 Joe Vanacore over 4 years ago in reply to Jin Ikeda

TI__Mastermind 18175 points

Hello Jin,

This is the allowable current and we do not spec abs max for these pins.

Kind Regards,

Joe

0 Jin Ikeda over 4 years ago in reply to Joe Vanacore

TI__Expert 6420 points

Hello Joe,

Thanks for your reply.

Let me confirm your answer.

Characterized 4mA. And it is allowable current value. We don't spec allowable "MAX" current ?

Best Regards,

Jin

0 Joe Vanacore over 4 years ago in reply to Jin Ikeda

TI__Mastermind 18175 points

Hello Jin,

You are correct. We do not spec allowable "MAX" current.

Kind Regards,

Joe

Interface

Interface forum

DP83822I: LED_0 & LED_1 allowable current value and absolute maximum rating