PGA411-Q1 EVM change default settings

RAJASRI T

HI sir, we want change the default configuration 4VRMS to 7VRMS for that we need to change factory setting can we do that..

Tell us how can we do that or provide us some code with factory setting for default 7VRMS.Kindly help us ,we are in rush now .

We hope for immediate solution from you.

over 4 years ago

0 John Miller - Sensing over 4 years ago

TI__Mastermind 40295 points

Rajasrit,

Thank you for your inquiry and your interest in TI products.
To change the exciter voltage from 4Vrms to 7Vrms, change the EXTMODE field in the DEV_PHASE_CFG register from 01b to 10b.
The 4b EXTOUT field in the same register lets you change the exciter offset voltage.
For more info, please see pages 73 & 74 of the data sheet.

Regards,
John

0 RAJASRI T over 4 years ago in reply to John Miller - Sensing

Prodigy 20 points

HI Sir, we want to change the factory settings as default 7VRMS for that what we want to do.

0 John Miller - Sensing over 4 years ago in reply to RAJASRI T

TI__Mastermind 40295 points

Rajasrit,

Apologies. In my last reply I assumed you wished to change the Exciter voltage.
What device parameter do you wish to change to 7Vrms?

Regards,
John

0 RAJASRI T over 4 years ago in reply to John Miller - Sensing

Prodigy 20 points

hi sir ,actually i would like to change the factory settings as default 7RMS in MSB14 for that what we have to do,or you can change the factory settings and can give us the binary code

0 John Miller - Sensing over 4 years ago in reply to RAJASRI T

TI__Mastermind 40295 points

Rajasrit,
What does MSB14 refer to?
We have no code we can offer.

As was mentioned in another thread, this device is considered custom, so your company would have to have an NDA with TI for us to share any documents or code.

0 RAJASRI T over 4 years ago in reply to John Miller - Sensing

Prodigy 20 points

sorry sir ,its MSP430.

and we dont have any code regarding this,is there any solution for this issue

0 John Miller - Sensing over 4 years ago in reply to RAJASRI T

TI__Mastermind 40295 points

Rajasrit,

We have been contacted by your TI support engineer, and will transition communications to email.

Regards,
John

Interface

Interface forum

PGA411-Q1 EVM change default settings