Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 664 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCAN1044-Q1: TCAN1044-Q1 termination capacitor selection

Scarlett Cao
Expert 3760 points
Part Number: TCAN1044-Q1

Hi team,

Could you please share TCAN1044-Q1 termination capacitor part number and selection requirement? There's no BOM in EVM user guide. Could you please share?

Thanks,

Scarlett

  • 0
    TI__Guru 50795 points

    Hi Scarlett,

    Typical values for split capacitors are between 4.7nF and 100nF. This value can be selected to form a low-pass filter with the split termination resistors to target certain common-mode frequencies. See this previous thread for more info. 

    Let me know if you have any more questions.

    Regards,
    Eric Schott