• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 218 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TCAN1042-Q1: Max Values of Some Switching Parameters

TCAN1042-Q1: driver tr/tf maximum specification

Yasushi Fujiwara
Genius 12725 points
Part Number: TCAN1042-Q1


Hello Experts,

I have a question about below thread. Would you please tell a following question?
1. test condition (supply voltage, load condition, etc.)
2. 10pcs devices were same wafer lot? If it is different, please tell how many wafer lot did you use.

Best Regards,
Fujiwara

  • 0
    TI__Guru 74352 points

    Fujiwara-san,

    Thanks for bringing this to E2E.

    1. Supply voltage is referenced to the recommended conditions: 4.5V to 5.5V VCC. Load condition is 15pF on RXD and 60 ohms on the CAN bus. Temperature was -55C to 125C ambient temperature.

    2. Yes, these devices were from the same lot. I pulled this from characterization data.

    Regards,

    Eric Hackett