• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 282 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM26LV31E: Is AM26LV31ESDREP pin/package compatible with AM26LV31EIDR?

R C
Prodigy 25 points
Part Number: AM26LV31E

What are the main differences between these two products? Can AM26LV31ESDREP be a replacement for AM26LV31EIDR?

  • 0
    TI__Guru 74292 points

    R C,

    The main difference is the temperature range is extended for the EP version of the device. The EP version temperature range is -55C to 105C while the non-EP version is -40C to 85C.

    Some other differences:

    • Pulse skew on EP version has a maximum of 3ns. The non-EP version has a maximum of 1.5ns
    • The output current while and high impedance output current is a maximum of ±127uA, while the non-EP version has a maximum of ±100uA

    Other than that, the device's features are the same. Please let us know if you have any other questions.

    Regards,

    Eric Hackett

  • 0
    Prodigy 25 points

    Thanks!

    Now I'm looking for a replacement for AM26LV32EIDR that's pin-to-pin compatible and available in the market. Do you have any suggestions?

  • 0 in reply to R C
    TI__Guru 53575 points

    Hi RC, 

    For quad channel differential line receivers, try out the filtering system on the store page here. The pinout for such devices are fairly standard, so most of these devices will be pin-to-pin compatible for the same package type. 

    Regards,
    Eric Schott