• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 302 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCAN1043-Q1: INH Hold Time

Benjamin Balazsi
Prodigy 350 points
Part Number: TCAN1043-Q1
Other Parts Discussed in Thread: TCAN1043

Dear Interface Team,

could you please help me where can the INH hold time be found in the TCAN1043 and TCAN1145 datasheets?

Thank you,

Benjamin

  • 0
    TI__Guru 53555 points

    Hi Benjamin,

    I'm not sure I understand this request. INH is a Vsup-level open-source output for these devices. The pin will assert high whenever the device is in an active mode (not in Sleep mode). While asleep, the INH output goes high-Z and will discharge depending on the RC characteristics of the signal line and any other connected devices. 

    Let me know if I misunderstood your question here. 

    Regards,
    Eric Schott