Hello,
in a failure mode analysis we have identified a mode in which a Rx coax can be connected to the Tx pin.
how much of the signal on the Tx pins will be transferred to the Rx Pins in this mode?
are there any Tx to Rx suppression ratio's known for this part?
Hello Rodrigo,
Thank you for your reply,
i am not looking for Adjacent channel crosstalk, but how much signal is at the Rx pins if we inject data at the Tx Pins
since we always develop perfect and ideal PCBs 
we can ignore any crosstalk on a system level for now, main interest is on chip level
inserted an image below to visualize what i mean, this request may be a longshot and the ration might not be known/tested
Regards Arne Maathuis
