• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 191 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

FPC402: Cannot read back register value

FPC402: LED control by FPC402

Ben Kuo
Expert 7560 points
Part Number: FPC402

Dear team,

Customer want to config LED blink mode by duty set up. 

Based on EVM and GUI, we can support this LED configuration  function.

Could you share device register map with me and help me to figure out register setting? thanks.

Please share relevant document with me off-line. Thanks.

<benkuo@ti.com>

  • 0
    TI__Guru* 93670 points

    Hi Ben,

    This is part of the programming guide. I just checked and you do have access to these documents. Please log in at TI.COM and under your name you should see Secured Resources. Under this tab, you should be able to find design files for the FPC402 documents including programming guide and etc.

    Regards ,, Nasser