DP83TD510E: Question about diver

Hidenori Shiraki

Prodigy 90 points

Part Number: DP83TD510E

Dear Sir/Ms.

I found DP83TD510E Linux driver were discussed in different sread.

Regarding driver for this PHY,

1. What OS the driver supprts? (or will support?) except for Linux, any other OS to be supported?

2. Any drivers available now? or milestone of them?

Regards,

Shiraki

over 3 years ago

0 Vikram Sharma over 3 years ago

TI__Genius 16030 points

Hello Shiraki,

Please find a sample code here :

https://git.ti.com/gitweb?p=ti-analog-linux-kernel/dmurphy-analog.git;a=commit;h=fefa908e4e3262455a0cec08f3bb7161d7792d02

We are working on some final testing on this and will release it on ti.com. But it should be good to be refered for modification for any other OS. We only share the sample linux code and do not have direct drivers for other OS.

Regards,

Vikram

+1 Hidenori Shiraki over 3 years ago in reply to Vikram Sharma

Prodigy 90 points

Hello Vikram，

I have a question about the driver,

The 10BASE-T1L PHY (DP83TD510E) suports below MAC interface,

Which one is the driver intended to be used for ?

MAC interface:
– MII mode
– RMII master/slave mode
– RGMII mode
– RMII master low-power 5-MHz mode
– RMII back-2-back mode for range extender

Regards,

Shiraki

0 Vikram Sharma over 3 years ago in reply to Hidenori Shiraki

TI__Genius 16030 points

Hello Shiraki,

Sample driver shared earlier has an example of Rgmii controls in the driver. If customer wants to change control of any other mode then they have to refer the datasheet for specific register information.

Regards,

Vikram

Interface

Interface forum

DP83TD510E: Question about diver