• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 148 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB954-Q1EVM: image output issue with EVM

Yusuke Mukuno
Expert 7395 points
Part Number: DS90UB954-Q1EVM
Other Parts Discussed in Thread: ALP

Hi expert,

My customer have an issue of image output with EVM.

Please refer the attached excel file.

Could you please give me your advice?

954EVM_issue.xlsx

Thanks

Muk

  • 0
    TI__Guru** 103215 points

    Hello Muk,

    The ALP screen shot shows that the 953 is linked in synchronous mode but the back channel rate is 10Mbps which is not the correct operating mode. If you want to use 953 in synchronous mode with 954, then adjust the back channel rate in 0x58 to 50Mbps 

    Best Regards,

    Casey