• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 325 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

SN55115: SN55115

SN55115: Differences between Rel Classes

Liu Yang
Expert 8965 points
Part Number: SN55115

Hi Team,

The differences between the 3 parts are shown on following link.


https://e2e.ti.com/support/interface-group/interface/f/interface-forum/948693/sn55115-sn55115?tisearch=e2e-sitesearch&keymatch=SN55115J%20SNJ55115J%20JM38510%2F10404BEA


However what the difference between the 3 Rel Class MIL-COM, QML-Q (CLASS-B) and JANB?

Beat Regards,
Tom Liu

  • +1
    TI__Mastermind 48308 points

    Liu,

    I spoke to our quality engineer and here is what I have found. 

    MIL-COM = represents standard commercial grade part number. 

    QML-Q (CLASS B):

    * QML = Qualified Manufactures List

    * Q = Military Performance Specification [MIL-PRF] 38535

    * CLASS B = Items that have been subjected to and passed requirements of MIL-PRF-38535

    JAN-B

    *JAN = Joint Army Navy

    * B = Items that have been subjected to and passed requirements of MIL-PRF-38535

    I have attached a pdf document link that describes this information:

    https://www.ti.com/lit/sg/slyt532h/slyt532h.pdf?ts=1634319725811

    Hope this helps,

    Regards,

    -Tyler