Interface forum

State TI Thinks Resolved
Locked Locked
Replies 2 replies
Answers 1 answer
Subscribers 33 subscribers
Views 278 views
Users 0 members are here

Support feedback

Options

Wendy Wang1

Mastermind 18795 points

Part Number: TUSB8043

Hi team,

I'm not familiar with this TUSB8043RGC device. Do we need to load firmware or flash some software to realize usb3.0?

Thanks a lot!

Thanks & best regards,

Wendy

over 4 years ago

0 Malik Barton57 over 4 years ago

TI__Guru 64326 points

Hi Wendy,

TUSB8043 is a state machince based device and does not require FW to work in default operation. EEPROM may be used to change the configuration of the device and status reported tot eh US?B host for a variety of reasons.

0 Malik Barton57 over 4 years ago

TI__Guru 64326 points

Hi Wendy,

TUSB8043 is a state machince based device and does not require FW to work in default operation. EEPROM may be used to change the configuration of the device and status reported tot eh US?B host for a vareity of reasons.

Interface

Interface forum

TUSB8043: realize USB3.0