• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 592 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83869HM: correct value of MDIO pull-up?

Jaroslav Sykora
Prodigy 195 points

Part Number: DP83869HM

Hi TI,

In the DP83869HM datasheet, Revision A, on page 6 it is stated that the MDIO pin requires a 1k5 pull-up:

On page 39 it is stated that MDIO requires a 2k2 pull-up:

Please tell us what is the required pull-up value. We use VDDIO=1.8V.

Thanks,

Jaroslav.