DS90UB960-Q1: Linux driver for NVIDIA Xavier nx

Dudi Ildis

Prodigy 20 points

Part Number: DS90UB960-Q1

I'm looking for Linux driver for that device, I'm going to use it with Xavier NX....

over 4 years ago

0 Hamzeh Jaradat over 4 years ago

TI__Guru** 113050 points

Hello Dudi,

Unfortunately, we do not have a Linux driver for any of our SER/DES devices. You can reference the datasheet for programming guidance and also use our Analog Launchpad GUI to try out different programming.

Actually for these devices, if you have correct hardware sittings, then you will not need any or very limited software settings.

0 Dudi Ildis over 4 years ago in reply to Hamzeh Jaradat

Prodigy 20 points

Thanks for your fast respond,

I'm new in Linux and just want to be sure that I know what to do:

Can I write the initialize procedure of the device in application layer and use the I2C Linux driver to Read/Write the data to the device.

0 Hamzeh Jaradat over 4 years ago in reply to Dudi Ildis

TI__Guru** 113050 points

I am not sure how you need to do that, but yes, our device configuration can be done (if required) via I2C bus.

Interface

Interface forum

DS90UB960-Q1: Linux driver for NVIDIA Xavier nx