DS90UB954-Q1: Does DS90UB954-Q1 can support two camera inputs with different resolutions?

wang qiang

Part Number: DS90UB954-Q1
Other Parts Discussed in Thread: DS90UB935-Q1, DS90UB953-Q1, DS90UB913A-Q1, DS90UB933-Q1

Dear Sir

We wan't to connect two camera with different resuoutions(one 720P camera with TI913 serializer，one 1080P camera wiht TI953 serializer) to DS90UB954

Does DS90UB954 support this usecase?

Thanks

over 3 years ago

+1 Shruti More over 3 years ago

TI__Expert 6345 points

Hello Wang,

Yes, the DS90UB954 can support the use case you described.

The DS90UB954-Q1 supports two main FPD-Link III operating modes:
• CSI-2 Mode (DS90UB953-Q1 and DS90UB935-Q1 compatible)
• RAW Mode (DS90UB913A-Q1 and DS90UB933-Q1 compatible)

Each input port can be individually configured for CSI-2 or RAW modes of operation. The input mode of operation is controlled by the FPD3_MODE (Register 0x6D[1:0]) setting in the Port Configuration register which is an RX port specific register.

Best Regards,

Shruti

0 wang qiang over 3 years ago in reply to Shruti More

Prodigy 220 points

Hi，Shruti

To double confirm,So each RX port Can be connected to a camera with different resolution,is it right?

Thanks

+1 Shruti More over 3 years ago in reply to wang qiang

TI__Expert 6345 points

Hello Qiang,

yes.

Best Regards,

Shruti

0 wang qiang over 3 years ago in reply to Shruti More

Prodigy 220 points

Hi,Shruti

Got it,Thank you very much!

Best Regards,

Interface

Interface forum

DS90UB954-Q1: Does DS90UB954-Q1 can support two camera inputs with different resolutions?