TFP401A-Q1: Design Help

ArTzy

Part Number: TFP401A-Q1
Other Parts Discussed in Thread: TFP401

Hi Experts,

Good day.

Client is developing a HDMI->LVDS Converter. They are focusing on the TFP401AIPZPRQ1, but they need a "Splash-Screen" or "Bootscreen" or an "On Screen Display" to show a picture immediately after start.

Do we have an IC that is capable of this? Or how can they solve this?

Thank you for your guidance.

Regards,
Archie A.

over 2 years ago

0 David (ASIC) Liu over 2 years ago

TI__Guru**** 152086 points

Archie

This depends on the HDMI source, the TDP401 will not generate a bootscreen.

Thanks

David

0 ArTzy over 2 years ago in reply to David (ASIC) Liu

TI__Genius 14899 points

Hello David,

Thanks for respnding.

Seems that TFP401 does not have a flash picture. Client asked any other chip that has this option (like the Realtec RTD2556T)?

As per them, their HDMI-Source needs too much time to generate a Picture from start.

Thanks for guiding.

Regards,
Archie A.

+1 David (ASIC) Liu over 2 years ago in reply to ArTzy

TI__Guru**** 152086 points

Archie A

The RTD2556T is a Display Controller while the TFP401 is a Bridge chip. We do not have a solution that can support this.

Thanks

David

Interface

Interface forum

TFP401A-Q1: Design Help