TPS65988: Question Asking

Jason Ciou

Part Number: TPS65988

Hi team,

I have two questions about TPS65988.

1.) Could you tell me how to set PP1 PP2 PP3 PP4? because I do not find any information of PP1, PP2, PP3, PP4 in datasheet.

2.) Where I can know the address of Port 1 I2C1, Port 1 I2C2, Port 2 I2C1, Port 2 I2C2. Could you give me an example, let me more easy to understand.

over 3 years ago

+1 Hari Patel1 over 3 years ago

TI__Genius 12700 points

Hi Jason,

The PP1 relates to the power paths of the PD controller and depends on how you would like to configure the device. You will just need to make sure it matches up to how the source/sink PDOs are configured.

The I2C addresses should be described in the datasheet in the I2C Interface section. It will also depend on your ADCIN pin configurations on your board.

Thank you,

Hari

0 Jason Ciou over 3 years ago in reply to Hari Patel1

TI__Expert 3600 points

Hi Hari,

Thanks.

Interface

Interface forum

TPS65988: Question Asking