• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 34 subscribers
  • Views 799 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

GPIB interface implementation

Rutskoy Andrey
Intellectual 465 points


Hello!

We want to add a GPIB interface to our lab power supplies. Does TI have some kind of ready-made solution or reference design for implementing the GPIB interface?
I found only SN75160, SN75161, SN75162 that used like transceivers. Interesting code implementations mostly.

Thank you

  • 0
    TI__Guru 74322 points

    Ruskoy,

    Those are the only GPIB specific transceivers we have in our portfolio. That being said, I'm not familiar with the GPIB specification, so I'm not sure what the specific physical layer requirements are for GPIB. I know for sure we don't software solutions supported by our group.

    Just to make sure I understand, you're wanting to actually add the hardware and software interface capability to your power supplies? Or you want to control the power supplies through a GPIB interface that is already available on the power supplies and are looking for software to help with that?

    Regards,

    Eric Hackett