• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 34 subscribers
  • Views 387 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCAN4550: Hold time spec inquiry

Charles Zhang1
Expert 3500 points

Part Number: TCAN4550

Hi Team,

TCAN4550's tSIH(Data in hold time) is 10ns(minimum), and customer system's MCU also has data output hold time spec.

My customer want to measure the hold time to ensure the data integrity, which spec should they refer to?

Regards,

  • 0
    TI__Expert 3500 points

    Hi Team,

    Is there any update?

    Thanks!

  • +1 in reply to Charles Zhang1
    TI__Guru 53535 points

    Hi Charles,

    The TCAN4550 requires a minimum hold time between when nCS is first asserted and when the SCLK signal can be recognized. Any delay between these two signals greater than the minimum specification is sufficient. Because the MCU also specifies a minimum hold time that may be greater or less than TCAN4550s specification, the longer minimum time should be used. 

    Let me know if this answers your question or if there's anything else I can help provide.

    Regards,
    Eric Schott