TL16C752D-Q1: Errata sheet change beetwen TL16C752C-Q1 and TL16C752D-Q1

yves gagniere

Part Number: TL16C752D-Q1
Other Parts Discussed in Thread: TL16C752CI-Q1

Dear team,

Does the SLLZ058A apply to C and D version or is there an updated errata for the D version? Could you pls also confirm that errata are valid for /Q1 and Q1 version with the same revision indice (C or D).

thanks for your support

over 3 years ago

0 Eric Hackett over 3 years ago

TI__Guru 74292 points

Yves,

This bug was fixed in the D version of this device, so the errata no longer applies. And there actually isn't a Q1 version of the C device, but yes, both versions of the D version have this fix and the errata is no longer relevant.

Regards,

Eric Hackett

0 yves gagniere over 3 years ago in reply to Eric Hackett

TI__Intellectual 2400 points

Hi Eric,

Does it means that TL16C752CI-Q1 is also a D version? Could you please confirm if the device below is a C or a D as the marking is the same according to DS.

is it a Q100?

thanks

Yves

0 Eric Hackett over 3 years ago in reply to yves gagniere

TI__Guru 74292 points

Yves,

The device in your image is a D device based on the orientation of the topside marking. The CI version is not the same as the D version, the D version is the second revision.

Regards,

Eric Hackett

0 yves gagniere over 3 years ago in reply to Eric Hackett

TI__Intellectual 2400 points

thanks Eric, do we have a comparison of the CI version versus C or D. I'm struggling with the customer a I thought by mistake that CI was a C version.

have a nice day

Yves

0 Eric Hackett over 3 years ago in reply to yves gagniere

TI__Guru 74292 points

Yves,

Since this is being handled through email now, I'm going to close this thread.

Regards,

Eric Hackett

0 erwan machillot over 3 years ago in reply to Eric Hackett

Prodigy 10 points

Dear support team,

Unfortunately The subject is not resolved. We didn't know how to identify between these three part numbers : TL16C752CIPFBRQ1 or TL16C752DPFBR or TL16C752DPFBRQ1 who all have the same top marking "T16C752DQ", which is mounted on an electronic card.

Can you give us the method to clearly identify them.

Regards,

Erwan Machillot

0 Eric Hackett over 3 years ago in reply to erwan machillot

TI__Guru 74292 points

Erwan,

The only way to determine which version is populated on the board from the topside marking is to look up the code on our internal system, or check the shipping label. That being said, these devices are functionally equivalent, so regardless of the device on the board, the system should behave no differently.

Regards,

Eric Hackett

Interface

Interface forum

TL16C752D-Q1: Errata sheet change beetwen TL16C752C-Q1 and TL16C752D-Q1