DS280DF810EVM: DS280DF810 altium sch. design -- symbol

Steven Sim

Part Number: DS280DF810EVM
Other Parts Discussed in Thread: DS280DF810

Hi Gent.,

May I get the DS280DF810 symbol for our schematic design in the Altium tool? I can't generate the correct symbol of DS280DF810 based on the below link message. thanks for help.

Ultra Librarian for TI

Regards,

Sim

over 3 years ago

0 Rodrigo Natal over 3 years ago

TI__Mastermind 19235 points

Hi,

I took a look at librarian site; it should work. Just select the Altium option.

Thanks,

Rodrigo Natal

0 Steven Sim over 3 years ago in reply to Rodrigo Natal

Prodigy 65 points

Natal,

I use this function to generate the symbol, but the symbol is NOT good as it is seperated as 3 parts, one of part only has Pin D9. it is NOT reasonable.

Sim

+1 Rodrigo Natal over 3 years ago in reply to Steven Sim

TI__Mastermind 19235 points

This is what we have available. Alternatively you may request download access via the TI.com product page to the layout file for DS280DF810 evaluation board (see link below). You may use it as a reference.

https://www.ti.com/drr/opn/DS280DF810-DESIGN

Thanks,

Rodrigo Natal

0 Steven Sim over 3 years ago in reply to Rodrigo Natal

Prodigy 65 points

Thank Natal, I will apply it.

Sim

Interface

Interface forum

DS280DF810EVM: DS280DF810 altium sch. design -- symbol