100base-T1 & 1000base-T1 PHY ethernet solution for RGMII_TX or PCIe

Shuai Yuan

Hi team

Does TI have suitable solutions for below need, which used in Motor drive application.

1. RGMII Switch 1:4 output support two channels 1000base-T1 PHY and two 100base-T1 PHY

2. 1000base-T1 PHY dual channels

3. 100base-T1 PHY channels

4. PCIe Switch 1:4 output support two channels 1000base-T1 PHY and two 100base-T1 PHY

CPU: Nvidia Orin

0 Gokul Koraganji over 3 years ago

Hi Shuai,

Sorry, we don't have switches in our Ethernet portfolio.

--
Regards,
Gokul.

0 Shuai Yuan over 3 years ago in reply to Gokul Koraganji

Do we have 1000base-T1/100base-T1 PHY solutions?

+1 Gokul Koraganji over 3 years ago in reply to Shuai Yuan

Hi Shuai,

We have a wide range of 100Base-T1 and 1000Base-T1 PHYs in our portfolio. Please refer to the following page on ti.com. https://www.ti.com/interface/ethernet/phys/overview.html

--
Regards,
Gokul.

0 Shuai Yuan over 3 years ago in reply to Gokul Koraganji

Do we have a overview introduction for our 100Base-T1 and 1000Base-T1 PHYs solutions, such as slides for a brief products chosen?

You can send it to my email a0488839@ti.com. Appreciate for your help and support.

0 Gokul Koraganji over 3 years ago in reply to Shuai Yuan

Hi Shuai,

Let me check with the team on rhe availability of the overview and get back to you.

+1 Shuai Yuan over 3 years ago in reply to Gokul Koraganji

Appreciate for your support and look forward to your reply

+1 Gokul Koraganji over 3 years ago in reply to Shuai Yuan

Hi Shuai,

I'm on PTO and will be back next week. Please expect a few days delay in response.

Thanks.

0 Shuai Yuan over 3 years ago in reply to Gokul Koraganji

Hi Gokul， thanks for your sharing and technical supports

Interface forum