Hi Sir,
could help double check there is any problem with this schematic ? and customer need as sink and source application. we checked it and does not seem to any problem.
customer application is Tri-band Wi-Fi router.
thanks for your help and support.
Hi Tommy,
You can check the links below for additional resources.
EVM User Guide
https://www.ti.com/lit/pdf/slvubo9
Hardware Design Guide
https://www.ti.com/lit/pdf/slva888
I noticed you have an LDO with a more than 10uF on VBUS directly, which violates the spec for the capacitance on VBUS. You will want to reference the design guide above.
You will also want to put some local cap on the PPHV pins. Follow the EVM above.
Jacob
