• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 298 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65987EVM: TPS65987: Binary code

Udesh Singla
Intellectual 500 points

Part Number: TPS65987EVM

HI We want to test the EVM. In this as per gui reference videos we want to flash the binary code with the help of GUI code to set the current and voltage as per our application. i got the gui but did not got any binary code.

Could you please suggest where we can get this binary code.

  • 0
    TI__Mastermind 31530 points

    Hello Udesh,

    To load the project and get the .bin file, you can got to Project > New Project > select the device you are using (TPS65987) > select the template that reflect your application > select the port type of the design > under the Device Initialization Chain section of the General Settings tab, select the appropriate number of devices and bitfield addresses if using a single image to flash more than one TPS659xx device > Click the Port X Settings tabs to configure the settings for the desired application > select Save Binary under the Binary menu to save the low-region binary image once the configuration is complete > select Save Project under the Project menu to save the project settings to the specified location.

    For more detail you can refer to TPS659xx Application Customization Tool User's Guide, https://www.ti.com/lit/ug/slvub60c/slvub60c.pdf?ts=1647438923687.

    Regards,

    Tommy