Maybe a level shifter but it will somehow bring delays. Is there some other solutions?

Thanks !

Hi Xiyao, 

Can you help provide some more background for this inquiry? 

In addition, my support is for the SerDes devices and I recommend reaching out to your regional TI sales associate to provide the most appropriately-fitting  power component for this application. 

Best,

Shu

Hi Shu,

The serializer collects the signals from two sensors, and then transfer the signal to the Des and then to CPU.We need this because the cable on the sensor side are two many. Because the mechanic design. We don't have enough area for so many cables. So I would use a Ser and Des to reduce the cables.

But the output of the sensors are 5V level. The Ser. is 3V3 level. So I need to reduce the output voltage level of the sensors to 3v3. Then the Ser. would do his job.

Do you have some solutions if the signals to be collected are higher than 3v3 for the Ser.?

Thanks.

Best,

Xiyao