• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 33 subscribers
  • Views 400 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB913A-Q1: Size of camera sensor

Ohad Bonneh
Intellectual 2650 points

Part Number: DS90UB913A-Q1

Hi all, 

I have a small problem regarding the FPD-LINK,

I don't understand how can I calculate to max camera sensor size that i can have as an input to the serialize.

what are the main factors that i need to consider? 

thanks!  

  • +1
    TI__Mastermind 28091 points

    Hi Ohad,

     Thank you for your inquiry.

     There are a number of parameters which contribute to the maximum sensor size which can be input to the serializer. The DS90UB913A can be set up in multiple configurations as shown in the table from section 6.3 of the datasheet below.

    To maximize sensor size, you would also want to maximize your PCLK frequency, with factors such as refresh rate, frame height, frame width contributing to determining your PCLK. In this case, Max PCLK = Image sensor size * refresh rate * 0.9 (10% overhead for blanking interval). For example, in 10 bit max (100MHz max PCLK) with a refresh rate of 60Hz, a sensor size of 1.8MP could be used.

     -Thomas

  • 0
    TI__Intellectual 2650 points

    Hi Thomas, 

    Couldn't get a clearer answer than this. 

    many thanks!