XIO2001EVM：WinRom

MAMORU MATSUDA

Prodigy 20 points

Part Number: XIO2001EVM
Other Parts Discussed in Thread: XIO2001

I need WinROM v3.1 or higher version for XIO2001 EEPROM programming. Can I know how to download it? Thanks.

My EMAIL address:

mamoru.matsuda@primemotion.com

Best regards,

over 3 years ago

0 Nicholaus_Malone over 3 years ago

TI__Mastermind 27925 points

Hello,

The WinROM program requires device drivers that communicate with the PCI configuration space as described in the datasheet. The program has not been supported in some time, and the drivers have not been maintained. This means the software will likely not work with modern operating systems.

I'm looking to see if we have a compiled version of this software, and I will follow-up within 24 hours.

Regards,

Nicholaus

0 MAMORU MATSUDA over 3 years ago in reply to Nicholaus_Malone

Prodigy 20 points

Hello Nicholaus,

We can prepare a Windows 7-32 bit environment for this project.
We have already decided on an EVM study and mass production schedule for this project.
Thank you.

Best Regards,
Matsuda

0 Nicholaus_Malone over 3 years ago in reply to MAMORU MATSUDA

TI__Mastermind 27925 points

Hi Matsuda,

Sorry, I am having issues finding a compiled version of this project. Please allow me some more time.

Regards,

Nicholaus

0 Nicholaus_Malone over 3 years ago in reply to Nicholaus_Malone

TI__Mastermind 27925 points

Hi Matsuda,

Attached is the WinROM 3 software. It is no longer supported and provided as-is.

Regards,

Nicholaus

WinRom.zip

0 MAMORU MATSUDA over 3 years ago in reply to Nicholaus_Malone

Prodigy 20 points

Hi Nicholaus,

I received the WinROM3 program.
I was able to completely solve this problem.
Thank you for your generous support.

Best Regards,
Matsuda

Interface

Interface forum

XIO2001EVM：WinRom