• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 263 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLK2711-SP: power on sequence of transmitter and receiver

Dean Michal
Prodigy 130 points
Part Number: TLK2711-SP

I've got a question of TLK2711-SP. I will use 2 devices. one is only transmitter function and the other is only receiver. two devices have a data interface.

How should I do the power-on sequence between transmitter and receiver?

I look forward to hearing from you.

If you have a related data, please attach the document.

Thank you.

  • +1
    TI__Mastermind 36743 points

    Hi,

    I would recommend powering on the transmitter before the receiver.  The reason for this is that active transitions must be present on the receiver for a proper reset.  Please see the power on reset section of the datasheet for details on this.

    Thanks,

    Drew