• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 128 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB953-Q1: DS90UB953-Q1

ami weill
Prodigy 100 points
Part Number: DS90UB953-Q1
Other Parts Discussed in Thread: TMUX646

hello ETE TEAM,

i want to connect mipi mux -TMUX646 to serializer - DSUB953-Q1.

I NEED TO ADD 50OHM RESISTOR ON EVERY Line (4 differential data line, 1 differential clk line) THAT CONNECT BETWEEN THE COMPONNENTS

  • +1
    TI__Guru** 102855 points

    Hello Ami,

    I'm not sure what the question is here exactly, but it sounds like you are asking if resistors are needed between the 953 CSI-2 output and TMUX646? That would not be needed; the 953 CSI-2 signals should connect directly to the mux with no passives in-between 

    Best Regards,

    Casey